VRF Support

[rhap4boyz]

I have the following switches, how do I know if they support VRF? Don't need MPLS.

Do I simply look for VRF-Lite?  Tried Cisco feature navigator, some does not show up

WS-C3508G-XL-EN - c3500xl-c3h2s-mz.120-5.WC13.bin

WS-C3560-24PS-S - c3560-advipservicesk9-mz.122-25.SED/c3560-advipservicesk9-mz.122-25.SED.bin

WS-C4507R - cat4500-entservicesk9-mz.122-54.SG1.bin

WS-C3560-24PS-S - c3560-advipservicesk9-mz.122-25.SEB/c3560-advipservicesk9-mz.122-25.SEB.bin

WS-C3560G-24PS - s72033-ipservicesk9-mz.151-1.SY1.bin

6509 - s72033-ipservicesk9-mz.151-1.SY1.bin

Nexus 5548 - n5000-uk9-kickstart.6.0.2.N2.7.bin

[InayathUlla Sharieff · Accepted solution]

Hi,

a)

3560/3750:-

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/configuration/guide/3750xscg/swiprout.html#pgfId-1320198

b)

4500:

Starting with Cisco IOS Release 12.2(52)SG, the Catalyst 4500 switch supports VRF lite NSF support with routing protocols OSPF/EIGRP/BGP.

c)

6500:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/pfc3mpls.html#wp1302591

d)

Nexus 5548:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/unicast/5_0_3_N1_1/Cisco_n5k_layer3_ucast_cfg_rel_503_N1_1/l3_virtual.html#wp1075639

HTH

Regards

Inayath

*********Please do not forget to rate this post if the info is helpfull******