07-29-2007 10:57 PM - edited 03-05-2019 05:33 PM
hi guys,
i have an ids and i want to monitor several interfaces in my redundant 6509. would vspan and rspan could do the work?
thanks,
alex
07-29-2007 11:13 PM
Hi Friend,
If the interfaces which you want to monitor and ids are on same switch then local SPAN will work for you but if the interfaces which you want to monitor and IDS are on different switches then you have to configure RSPAN.
HTH
Ankur
*Pls rate all helpfull post
07-30-2007 06:28 PM
hi guys,
i have a number of interface to monitor with my ids, problem is i only have one port in my ids and i would like to monitor ports in the traffic coming from the private wan and traffic from the internet on both switches. any idea how this scenario? will vspan/rspan/span will work on this? attached is the simple network diagram.
thanks
alex
07-30-2007 04:28 AM
Alex, Please brief us about the network topology and attach a brief diagram for better understanding.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide