cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
149
Views
0
Helpful
3
Replies
Beginner

VSS additional new LINE CARD

Hi All

I have to adding more new LINE CARD into empty module on 6500 switch . So this switch is operation by VSS

How i can do this task  and also is there awareness before to do it .

Please advice . I not sure it can insert without turnoff or not ? and also what kind of necessary command before and after insert new Line card .

Everyone's tags (1)
3 REPLIES 3
Highlighted
VIP Expert

Hi,

Hi,

All modules for 6500 are hot swap able, meaning you can insert them while the switch is on but if you can, its better to do this in a maintenance window by shutting down the switch, insert the module and than turn it back on. No commands needed, the chassis/sup should recognize the module once inserted.

HTH

Beginner

Thank you sir.

Thank you sir.

Beginner

wasincisco99, Sorry to bother

wasincisco99, Sorry to bother you, but you can help me, how did you solve this problem ??

https://supportforums.cisco.com/discussion/13282866/cisco-ap1832i-cannot-convert-mobility-express-capwap-type

THanks by your help

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards