cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
406
Views
9
Helpful
2
Replies

VSS on 4510R+E with Wireless Controller?

iatsenbf417
Level 1
Level 1

Hi, I am unable to find much information on this for my exact chassis/IOS.

I am considering using VSS on our two new WS-C4510R+E switches, but we are planning to possibly use the built-in wiresless controller on the 4500's in the next year or two, and I had heard that VSS may not be compatible or something to that degree.

With redundant supervisors, I guess this would be a Quad-SUP config.

Is this true?

Thanks.

Hardware/Software Details:

Two WS-C4510R+E switches with redundant WS-X45-SUP8-E Supervisors

IOS: 03.06.03.E

ROM: 15.1(1r)SG4

IOS-XE 

License Level: ipbase

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

With VSS, wireless mode is not supported:

Note :

   Wireless mode is not supported in virtual switching system (VSS) mode.

   In wireless mode no line card is supported in the 10th slot of the Cisco Catalyst 4510R-E chassis.

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/guide-c07-733704.html

HTH

Ganesh Hariharan
VIP Alumni
VIP Alumni

Hello,

Agree with Reza, Having VSS with 4500 + SUP 8E wireless mode is not supported.

Have a look on the link which give you step by step approach to enable wireless mode in standalone switch.

Hope it Helps..

-GI