Hello,
I had today an issue with VSS switch.
I upload the IOS file on the switch through tftp. After that, I tried to copy the file on standby switch. After the process were done, the standby switch was reloaded automatically.
When the switch were came back, we put a console and see that the switch were in recovery mode. The switch couldn't boot from the newest ios on it, even if it has configured as the documentation says.
Switch# config terminal
Switch(config)# config-register 0x2
Switch(config)# boot system flash filename.bin
Switch# copy running-config start-config
Can you please help me to understand why the switch were reloaded?
I really need to upgrade the IOS, but I don't want to do it before having the exactly process and meanings.
Thank you!
