VTP Status

[Beaurr]

Hello,

on one of my switch ( cisco 2960G)

when i do a show VTP Status, i have this.

I don't want VTP. What does the second part circled in red mean? i launched the VTP mode off command. But before, it told me VTP server mode for "feature VLAN"?

[Georg Pauwen]

Hello,

not sure what you are asking. You have turned VTP to off, so the switch is not running VTP. You have 5 Vlans configured locally on the switch.

What is your specific question ?

[theovicel1]

 Hi Beaurr

VTP Operating Mode: off  --> means you've turn off vtp on your switch

Maximum Vlan supported locally: 255 --> i think it's clear it's a maximum vlan number you can configure on your switch

Number of existing vlans: 5 --> it's number of vlan in your data base vlan currently. (you can use "show vlan brief" to verify)

Configuration Revision: 0 --> that's means their are no vlan date base due to vtp configuration

MD5 digest: it's hash 

hope I have helped.

[Beaurr · Accepted solution]

ok Theovice and georg, thanks for your explanation