cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
446
Views
0
Helpful
3
Replies

VTP Version 3 Support on WS-C3750V2-48PS

Could you please advise me if c3750-ipservicesk9-mz.122-50.SE1.bin on WS-C3750V2-48PS would support VTP version 3

Please find the 'show vtp status' result below

VTP Version                     : running VTP2
Configuration Revision          : xx
Maximum VLANs supported locally : 1005
Number of existing VLANs        : xx
VTP Operating Mode              : Client
VTP Domain Name                 : xxxxxx
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Enabled
VTP Traps Generation            : Enabled

3 Replies 3

acampbell
VIP Alumni
VIP Alumni

Hi,

Looks like VTP VERSION 3 support on 3750 came in with IOS ver 12.2.52

Regards

Alex

Regards, Alex. Please rate useful posts.

Joseph W. Doherty
Hall of Fame
Hall of Fame

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

If you have access to the device, you might see if config mode "knows" VTP v3 commands - often a fast way to find out (NB: be careful that you don't actually change running config unless you really intend to)

Carlos Villagran
Cisco Employee
Cisco Employee

Hi!

Please refer to the 12.2.55-SE Release notes:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_55_se/release/notes/OL23053.html

VTP version 3 is available from 12.2(52)SE release onwards.

You can download the 12.2.55 release (which is the recommended from the site) in the following link:

https://software.cisco.com/download/release.html?mdfid=282526572&catid=268438038&softwareid=280805680&release=12.2.55-SE10&relind=AVAILABLE&rellifecycle=ED&reltype=latest

Have a nice day, best regards!

JC

Review Cisco Networking products for a $25 gift card