I am new to WCCP and I am having trouble getting the Sophos Web Appliance to Connect to a 6509e port channel. The Web app is on a VM host and the host is connected to the 6509 by two interfaces on a port channel.
Here are the wccp parts of the config:
ip wccp web-cache group-list 98 password
Standard IP access list 98
10 permit 172.18.4.55 (1403 matches) (host)
sh ip wccp
Global WCCP information:
Router information:
Router Identifier: 10.1.18.251
Protocol Version: 2.0
Service Identifier: web-cache
Number of Service Group Clients: 0
Number of Service Group Routers: 0
Total Packets s/w Redirected: 0
Process: 0
CEF: 0
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group access-list: 98
Total Messages Denied to Group: 0
Total Authentication failures: 735
Total Bypassed Packets Received: 0
sh ip wccp web-cache view
WCCP Routers Informed of:
-none-
WCCP Clients Visible:
-none-
WCCP Clients NOT Visible:
-none-
#sho ip wccp web-cache det
WCCP Client information:
WCCP Client ID: 172.18.4.55
Protocol Version: 2.0
State: NOT Usable (Initializing)
Redirection: L2
Packet Return: L2
Packets Redirected: 0
Connect Time: 00:00:04
Assignment: MASK
At one time I had the Server listed in WCCP Clients visible but, now it's gone. I am concerned about the State: NOT Usable (Initializing) statment. It is not changing. Has anyone had this problem? Of course Sophos said it was easy!
Thank you in advance.
