12-16-2009 12:07 AM - edited 03-06-2019 08:58 AM
Hello,
does anybody know what's the meaning of the syslog message "%CHKPT-SP-4-GET_HUGE_BUF: Client 33 buffer requested" I saw on a Cat6500 after configuring a monitor port?
Neither in error message decoder nor in the cisco search I found any hint.
Best Regards,
Thorsten Steffen
Solved! Go to Solution.
12-16-2009 12:34 AM
Hi,
It's a Bug CSCsw46893 please see the below description for the same hope this help !!
C2HD1-SI - %CHKPT-4-GET_HUGE_BUF: Client (Event Manager) message seen | |
Symptom: The following error message is seen with c2w2b while configuring SPAN PDT: %CHKPT-SW1_SP-4-GET_HUGE_BUF: Client 33 buffer requested (size = 9028) is too large Conditions: This error message is seen with c2w2b images while configuring SPAN Workaround: This error message is harmless since it doesn't have any functional impact, so please ignore it. Further Problem Description: Checkpoint Facility received a SPAN message larger than the maximum size authorized. Checkpoint Facility will still send the message but displays a warning. |
Regards
Ganesh.H
12-16-2009 12:34 AM
Hi,
It's a Bug CSCsw46893 please see the below description for the same hope this help !!
C2HD1-SI - %CHKPT-4-GET_HUGE_BUF: Client (Event Manager) message seen | |
Symptom: The following error message is seen with c2w2b while configuring SPAN PDT: %CHKPT-SW1_SP-4-GET_HUGE_BUF: Client 33 buffer requested (size = 9028) is too large Conditions: This error message is seen with c2w2b images while configuring SPAN Workaround: This error message is harmless since it doesn't have any functional impact, so please ignore it. Further Problem Description: Checkpoint Facility received a SPAN message larger than the maximum size authorized. Checkpoint Facility will still send the message but displays a warning. |
Regards
Ganesh.H
12-16-2009 12:35 AM
Hello Thorsten,
unfortunately the error message decoder does not provide information for all possible error messages.
the product error messages guide is here
http://www.cisco.com/en/US/docs/ios/12_2sx/system/messages/122sxsms.html
actually it is IOS version dependent
I don't see the message here too.
This section contains checkpointing (CHKPT) messages.
The message comes from supervisor (SP). it has severity level 4.
GET_HUGE_Buffer means that the system has tried to allocate a system buffer of category/size huge.
You can check system buffers with show buffer
Client 33 buffer requested, here 33 might be a process-id that requested the huge buffer.
It can be just a notification of this event.
>> after configuring a monitor port
Not easy to say if there is a relationship
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide