cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
17044
Views
10
Helpful
2
Replies
Sanghee Han
Beginner

what's the meaning of Method in show ip int bri??

hi all,

I wonder what's the meaning of Method in show ip int bri

Method : nvram, unset, manual...

what's the difference among them??

is anyone knows about this? or document?

1 ACCEPTED SOLUTION

Accepted Solutions
Giuseppe Larosa
Hall of Fame Master

Hello Sanghee,

the method is a short way to tell how the ip address has been given to the interface:

nvram -> saved config

manual -> configured after last reload

unset -> simply not configured

there should also an option for when you set the ip address using the initial setup dialog on a device with an empty or skipped configuration.

see command reference

http://www.cisco.com/en/US/partner/docs/ios/ipaddr/command/reference/iad_ip.html#wp1027146

or

http://www.cisco.com/en/US/docs/ios/ipaddr/command/reference/iad_ip.html#wp1027146

Table 30 provides the following list

The Method field has the following possible values:

•RARP or SLARP-Reverse Address Resolution Protocol (RARP) or Serial Line Address Resolution Protocol (SLARP) request.

•BOOTP-Bootstrap protocol.

•TFTP-Configuration file obtained from the TFTP server.

•manual-Manually changed by CLI command.

•NVRAM-Configuration file in NVRAM.

•IPCP-ip address negotiated command.

•DHCP-ip address dhcp command.

•unassigned-No IP address.

•unset-Unset.

•other-Unknown.

Hope to help

Giuseppe

View solution in original post

2 REPLIES 2
Giuseppe Larosa
Hall of Fame Master

Hello Sanghee,

the method is a short way to tell how the ip address has been given to the interface:

nvram -> saved config

manual -> configured after last reload

unset -> simply not configured

there should also an option for when you set the ip address using the initial setup dialog on a device with an empty or skipped configuration.

see command reference

http://www.cisco.com/en/US/partner/docs/ios/ipaddr/command/reference/iad_ip.html#wp1027146

or

http://www.cisco.com/en/US/docs/ios/ipaddr/command/reference/iad_ip.html#wp1027146

Table 30 provides the following list

The Method field has the following possible values:

•RARP or SLARP-Reverse Address Resolution Protocol (RARP) or Serial Line Address Resolution Protocol (SLARP) request.

•BOOTP-Bootstrap protocol.

•TFTP-Configuration file obtained from the TFTP server.

•manual-Manually changed by CLI command.

•NVRAM-Configuration file in NVRAM.

•IPCP-ip address negotiated command.

•DHCP-ip address dhcp command.

•unassigned-No IP address.

•unset-Unset.

•other-Unknown.

Hope to help

Giuseppe

View solution in original post

Thanks for your help.

it's great help to me.

Thanks again :)