cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
313
Views
0
Helpful
1
Replies

Which Gigabit Ethernet linecards can I use with 4003 and Sup1

Hi,

it would be very fine if somebody could tell me which ge linecards I can use in a catalyst 4003 chassis with a ws-x4012 supervisor engine 1.

Is it possible to use the 4448 or 4548 linecards?

Many thanks in advance,

Thorsten Steffen

1 Reply 1

andrew.burns
Level 7
Level 7

Hi,

The following link shows the supported modules:

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/installation/guide/01intro.html

Although it sounds like you'll be ok to use these modules, this platform is very nearly obsolete and the switch fabric is only 12Gbps.

HTH

Andrew.