cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
632
Views
0
Helpful
4
Replies
Highlighted
Contributor

which ios command to monitor packets

Hi everybody

Which ios command we can use to see as the packets enter or leave a particular port on cisco ios switches or router?

Here is my setp up

sw--- etherchannel---routed ports Router

I want to see which interface in etherchannel selects to send ip packets. We could use wireshark but my computer is pretty slow so I am wondering is there any particular ios command will do the job.

thanks and have a great weekend.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi Sarah

Try the PDF

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

View solution in original post

4 REPLIES 4
Highlighted
Advocate

Hi,

Try looking at this link

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_tech_note09186a0080094714.shtml

There ar good tips here on how to work out which way traffic flows

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.
Highlighted

Thanks Alex.

When I tried to open the link that is what i got:

The file or application you are trying to access may require additional  entitlement or you are trying to access a file with an invalid name.  Additional entitlement levels are granted based on a users relationship  with Cisco on a per-application basis.

Highlighted

Hi Sarah

Try the PDF

Regards,
Alex.
Please rate useful posts.

Regards, Alex. Please rate useful posts.

View solution in original post

Highlighted

Thanks Alex

Content for Community-Ad