cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3230
Views
5
Helpful
8
Replies

Wic 2 Compatability

Robo123
Level 1
Level 1

I have cisco 1921 router running with " c1900-universalk9-mz.SPA.152-2.T.bin" kindly confirm whether 1921 router will support WIC-2T card. 

If possible please share cisco documents. 

 

8 Replies 8

Mark Malone
VIP Alumni
VIP Alumni

should do if its a hwic-2t

 

https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/high-speed-wan-interface-cards/datasheet_c78-491363.html

 

Table 3. Supported Platforms and Quantities

 

 

Platforms

HWIC-1T

HWIC-1DSU-T1

HWIC-2T

HWIC-2A/S

Cisco 1841

2

2

2

2

Cisco 1861

No

No

No

No

Cisco 1941

2

2

2

2

Cisco 2801

2

2

2

2

Cisco 2811, 2821, 2851

4

4

4

4

Cisco 2901, 2911, 2921, 2951

4

4

4

4

Cisco 3825 and 3845

4

4

4

4

Cisco 3925 and 3945

4

4

4

4

As it is wic2t can you  plz clarify whether it will support the 1921 router 

Seb Rupik
VIP Alumni
VIP Alumni

 

The datasheet on the WIC-2T predates the release of the 1921 ISR, so doesn't list the router as supported:

https://www.cisco.com/c/en/us/support/docs/routers/3600-series-multiservice-platforms/7261-wic-2t.html#plat

 

This document shows that WIC cards are compatible with the 1921:

https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_ic.html#59414

 

So which means cisco 1921 Router will not support WIC 2t card

The latest documentation indicates that all WIC cards (including the WIC-2T) are supported on the 1921.

Can you share the document which is showing the same. 

https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/ic/hardware/installation/guide/oview_ic.html#37888

 

2-port serial WIC

WIC-2T

Cisco 1800 series (modular)
Cisco 2800 series
Cisco 3800 series
Cisco ICS 7750

Serial Interface Cards

Hello

 

I would say it does-

 

Host7#sh ver | in System image|CISCO1921
System image file is "usbflash0:c1900-universalk9-mz.SPA.154-3.M3.bin"
Cisco CISCO1921/K9 (revision 1.0) with 487424K/36864K bytes of memory.
*1        CISCO1921/K9        xxxxxxxx

Host7#sh inventory | in HWIC-1T
PID: HWIC-1T           , VID: V02 , SN: FOCxxxxxxxxx

 

res

Paul

 

 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul