10-15-2009 03:34 AM - edited 03-06-2019 08:08 AM
C6500-SUP720-3B#wr
%No memory available: Update of NVRAM config failed!
---------------------------------------
has anyone a explanation ? the Configuration is not that big it should definitly fit into the NVRAM, but the box is low on Memory :
Processor Pool Total: 391036432 Used: 366100000 Free: 24936432
I/O Pool Total: 67108864 Used: 10437776 Free: 56671088
10-15-2009 04:44 AM
Hello Emanuael,
check with sh users
if there are other vty sessions open
there might be a sh conf pending on some other vty.
the show proc mem doesn't show the amount of memory in filesystem nvram:
do
dir nvram:
example from a C6500 with sup720B
dir nvram:
Directory of nvram:/
1918 -rw- 149823
1919 ---- 24
1920 -rw- 149823
1 ---- 4
2 ---- 47
3 -rw- 0
1964024 bytes total (1811053 bytes free)
Hope to help
Giuseppe
10-15-2009 05:43 AM
service compress-config may help if the last suggestion show the config in NVRAM is large or almosted used.
10-15-2009 05:52 AM
Hello Guys,
Thanks for the responds, but it actually does ont help ...
here the output (and as I sayed, the config is not that larg ...)
C6K-SUP720-3B#dir nvram:
Directory of nvram:/
1918 -rw- 29322
1919 ---- 7175
1920 -rw- 29322
1 ---- 4
2 ---- 49
3 -rw- 3460
1964024 bytes total (1921331 bytes free)
C6K-SUP720-3B#sh conf | i Using
Using 29322 out of 1964024 bytes
Does anyone has other suggestions ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide