WS-2960S-48TS-S upgrade IOS problem !!!

[huga16001]

hi, WS-2960S-48TS-S switch upgrade IOS:

          Current IOS: c2960s-universalk9-mz.122-58.SE2.bin

          Upgrade IOS: c2960s-universalk9-mz.150-2.SE2.bin 

switch: boot flash:c2960s-universalk9-mz.150-SE2.bin

Loading "flash:c2960s-universalk9-mz.150-SE2.bin" ...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

@@@@@@ ...

File "flash:c2960s-universalk9-mz.150-2.SE2.bin" uncompressed and installed, entry point: 0x3000

executing...

Boot process failed...

switch:

what is problem ?????

help me !!! thanks all.

[Leo Laohoo]

c2960s-universalk9-mz.150-2.SE2.bin

c2960s-universalk9-mz.150-2.SE2.bin < --- This file is corrupt.

[Karthick Murugan]

It looks the file is corrupted. Execute dir flash: and check the size of the file and match it with the file size in the CCO.

Thanks & Regards,
Karthick Murugan
CCIE#39285

[huga16001]

Thanks, Leo Laohoo and karthick Murugan

i am download from

http://software.cisco.com/download/release.html?mdfid=282867583&flowid=46699&softwareid=280805680&release=15.2.1E&relind=AVAILABLE&rellifecycle=ED&reltype=latest

so, this is　source file,

the same problem ?

Switch#dir flash:

Directory of flash:/

    9  -rwx        2458   Mar 1 1993 00:00:53 +00:00  config.text

    2  -rwx    13244928   Jan 1 1970 00:01:09 +00:00  c2960s-universalk9-mz.122-58.SE2.bin

    3  -rwx    16353536  Nov 18 2013 15:59:16 +00:00  c2960s-universalk9-mz.152-1.E.bin

    4  -rwx        3096   Mar 1 1993 00:00:53 +00:00  multiple-fs

    5  -rwx         108   Mar 1 1993 00:29:43 +00:00  info

    6  -rwx        2421   Mar 1 1993 00:01:00 +00:00  config.old

    8  -rwx        1914   Mar 1 1993 00:00:53 +00:00  private-config.text

57931776 bytes total (28078592 bytes free)

Switch#

this IOS  // c2960s-universalk9-mz.152-1.E.bin  //

switch: boot flash:c2960s-universalk9-mz.152-1.E.bin

Loading "flash:c2960s-universalk9-mz.152-1.E.bin" ...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

@@@@@@ ...

File "flash:c2960s-universalk9-mz.150-2.SE2.bin" uncompressed and installed, entry point: 0x3000

executing...

Boot process failed...

switch:

Thanks all, help me

[huga16001]

Picture:

[devils_advocate]

My money would be on a corrupt IOS.

Firstly try downloading again and copy over to the switch.

If that still fails, try a different IOS version, i.e one up or one down.

I had an issue with a 3750X and a 15.* image and it would not boot for love nor money. Tried the IOS down from the one I was using and it seemed fine....weird but sometimes you get odd things happen

[Leo Laohoo]

Post the output to this command:

1.  sh version;

2.  verify /md5 flash:c2960s-universalk9-mz.152-1.E.bin e5579f9e888968b0fdd0c2abea23ee7b

[huga16001]

hi all, thanks for help me

Leo Laohoo, this is fine

but, this IOS is dependency clock ?? My switch time :

[Leo Laohoo]

Time doesn't need to be synch or correct.  Output shows the file is OK.

Can you boot this file:  c2960s-universalk9-mz.122-58.SE2.bin

If you can, then try a different IOS.  Try 15.0(2)SE4.

[huga16001]

Thanks,

    i can my current IOS c2960s-universalk9-mz.122-58.SE2.bin no problem,

[Leo Laohoo]

Then try using 15.0(2)SE4 instead.

[huga16001]

c2960s-universalk9-mz.150-1.SE3.bin IOS is OK

[Leo Laohoo]

c2960s-universalk9-mz.150-1.SE3.bin

I would not use 15.0(1)SE even if my life depended on it! 

I repeat, use 15.0(2)SE4.

[huga16001]

Thank you Leo Laohoo,

     i think, Cisco IOS dependence HV (hardware version 04) not support for c2960s-universalk9-mz.152-1.E.bin

, my switch HV (V04),

     help me, check your switch HV !

     thanks, for all

[Leo Laohoo]

I am not running 15.2(1)E and I will NOT touch 15.2(1)E.