Hi Karthik,

anas.awad · ‎10-17-2016

Hello Everyone,

I'm trying to manage the switch through the GUI based application. is it possible?

its not working as attached.

karthikbe40 · ‎10-17-2016

Hi,

You can configure in GUI mode also..

for this you need the cisco CatOS IOS image with .cv (cisco view) image file in flash memory.

Check the below command..

switch# dir bootflash:

cat4000 (enable) dir bootflash:
-#- -length- -----date/time------ name
  1  3651336 May 16 2001 14:30:39 cat4000.5-5-8.bin
  2  2580656 Oct 09 2001 11:22:20 cat4000-cv.5-5-8.bin
 
9365320 bytes available (6232248 bytes used)
cat4000 (enable)

It shows two image file means, you just need to enable http server command in 4506-E switch.

set ip http server enable

set ip http port 2398 (use 2398 instead of usual port no.80

set ip http port default

If two images are not displayed..you need to download the image file from cisco website.

Regards

Karthik

anas.awad · ‎10-17-2016

Hi Karthik,

Thank you for replay.

so i guess upgrading is mandatory??

as below is the current image

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500es8-UNIVERSALK9-M), Version 03.07.00.E RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Sun 07-Dec-14 17:59 by prod_rel_team

Cisco IOS-XE software, Copyright (c) 2005-2014 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: 15.1(1r)SG5
TheGate-Core-SW uptime is 21 weeks, 1 hour, 49 minutes
Uptime for this control processor is 21 weeks, 1 hour, 51 minutes
System returned to ROM by power-on
System restarted at 09:44:45 UTC Mon May 23 2016
System image file is "bootflash:cat4500es8-universalk9.SPA.03.07.00.E.152-3.E.bin"
Jawa Revision 3, RadTrooper Revision 0x0.0x41, Conan Revision 0x1B9E

Last reload reason: power-on

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Information for 'WS-X45-SUP8-E'
License Level: entservices Type: Permanent Right-To-Use
Next reboot license Level: entservices

cisco WS-C4506-E (P5040) processor (revision 2) with 4194304K bytes of physical memory.
Processor board ID FXS1849Q089
P5040 CPU at 2.2GHz, Supervisor 8-E
Last reset from PowerUp
30 Virtual Ethernet interfaces
288 Gigabit Ethernet interfaces
40 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.

Configuration register is 0x2102

WS-4506-E Manage by Web mode.