WS-4510R+E VSS Quad Supervisor (Sup 8-E)

[Rss]

Hi

I have a Sup-8E in stock, but I want to use in my VSS 4507 chassis active-standby.

Does anybody knows if it is possible to use active chassis with two Sup 8-E and the standby chassis with only one?, some kind of VSS quad Supervisor but with only 3 supervisors?

Thanks for your help.

Regards

[acampbell]

Hi,

Looking at the config guide for IOS/XE 3.6.0
QUAD supervisors ARE supported

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/XE3-6-0E/15-22E/configuration/guide/xe-360-config.html

Then in the VSS section.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/XE3-6-0E/15-22E/configuration/guide/xe-360-config/vss.html#85440

I suggest you look for the correct config guide for your IOS/XE and read thoroughly

INDEX:-
http://www.cisco.com/c/en/us/support/switches/catalyst-4500-series-switches/products-installation-and-configuration-guides-list.html

Regards
Alex