10-15-2020 06:53 AM
Hey Crew. I ran into an issue with a old switch.
I have a pair hooked together
1 28 WS-C3750G-24TS 12.2(55)SE6 C3750-IPSERVICESK9-M
* 2 28 WS-C3750G-24TS 12.2(55)SE6 C3750-IPSERVICESK9-M
I have two firewalls with management port connected to port 10 on each switch. both in VLAN1, firewall IPs are 10.250.1.251 and 10.250.1.252.
The firewalls cant ping the VLAN 10.250.1.1 and the switch cant ping 10.250.1.251 or 252. Not I also tried swapping VLAN1 to VLAN354.
attached config. thanks for any input.
Solved! Go to Solution.
10-15-2020 07:25 AM
Hi,
Are the interfaces 1/0/10 and 2/0/10 in up and up mode? Do you see the Mac address for each mgmt interface on the switch?
Are the firewalls in a cluster or work individually?
HTH
10-15-2020 07:15 AM
Hello my friend,
did you check the rules in your firewall? Check if the ICMP is allowed in this interface.
10-15-2020 09:02 AM
ok, the Firewall Management port isnt using firewall rules. I had it working on another switch in VLAN 354.
10-15-2020 07:25 AM
Hi,
Are the interfaces 1/0/10 and 2/0/10 in up and up mode? Do you see the Mac address for each mgmt interface on the switch?
Are the firewalls in a cluster or work individually?
HTH
10-15-2020 09:20 AM
here is the interface status
Gi1/0/10 SH-PA-3220-A MGMT connected 1 a-full a-1000 10/100/1000BaseTX
Gi2/0/10 SH-PA-3220-B MGMT connected 1 a-full a-1000 10/100/1000BaseTX
good idea, checking for the MAC... I dont see it.
10-15-2020 09:48 AM
Great idea checking for the MAC address, I didnt see it but found others... did a SHOW CDP NEI and found my remote tech crossed the wrong cables, so I have resent a new tech to fix this issue. thanks
10-15-2020 10:28 AM
Glad to know, it is all working for you now!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide