05-22-2017 07:55 AM - edited 03-08-2019 10:40 AM
Hi,
I have requirement of 24 port fiber tengig switch and I opted WS-C3850-24XS-E switch now I am confused do I need to order 3 C3850-NM-8-10G= network modules or the device comes with 24 fiber port and only I need to order 24 GLC-LH-SMD SFPs.
Inshort do I need to order network module or not?
Regards
Irfan
05-22-2017 08:03 AM
Hi
No you don't there 10GB switches , as per doc there SFP+ which is 10gb ports , 24 x 10gb
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/data_sheet_c78-720918.html
Models |
StackWise-480 |
||||
Yes |
|||||
WS-C3850-24U |
24 UPOE |
1100WAC |
800W |
||
WS-C3850-48U |
48 UPOE |
1100WAC |
800W |
||
WS-C3850-24XU |
24 UPOE (100Mbps/1/2.5/5/10 Gbps) |
1100WAC |
580W |
||
WS-C3850-12X48U |
48 UPOE (with 12 100Mbps/1/2.5/5/10 Gbps Ports) |
1100WAC |
630W |
||
WS-C3850-12S |
12 SFP |
350WAC |
|
||
WS-C3850-24S |
24 SFP |
||||
WS-C3850-12XS |
12 1/10G SFP+ |
350WAC |
- |
||
WS-C3850-24XS |
24 1/10G SFP+ |
715 WAC |
- |
||
WS-C3850-48XS |
48 1/10G SFP+ |
750WAC (front to back) |
- |
No |
WS-C3850-24XS-E |
Stackable 24 SFP+ Ethernet ports, with 715WAC power supply 1 RU, IP Services feature set |
05-23-2017 12:58 AM
Guys,
My question is very simple is the switch WS-C3850-24XS-E comes with 24 port sfp+ slot or do I need to order three C3850-NM-8-10G= so that I can get 24 tengig port.
so to get 24 tengig port do I need to order which one from the below two options
qty part
1 WS-C3850-24XS-E
24 GLC-LH-SMD
OR
qty part
1 WS-C3850-24XS-E
3 C3850-NM-8-10G=
24 GLC-LH-SMD
Regards
irfan
05-23-2017 01:00 AM
in the post above ive shown you don't need the module 24 x 10gb ports
these are standard 10gb per port switches the X series
WS-C3850-24XS |
24 1/10G SFP+ |
05-23-2017 10:54 PM
Thannks Mark,
so I need to order only below parts, I mentioned tengig single mode sfp as the device support both 1g and 10g .
qty part
1 WS-C3850-24XS-E
24 GLC-LH-SMD
please let me know if its ok...
05-24-2017 12:44 AM
There 1 GB SFPs yes going into 10GB ports with the SMD , that SFP is supported so your ok if that's what your using, there 10KM SFPS are your other devices that far away ? , either way here's exactly what's supported on that platform in sfp
supports at 10gb
WS-C3850-12XS |
SFP-10G-SR |
XE 3.7.1E |
XE 3.7.1E |
This is what it supports at 1GB SFP
WS-C3850-12XS (with C3850-NM-8-10G NM) |
GLC-T (10/100/1000) |
XE 3.7.1 |
XE 3.7.1 |
GLC-TE |
|
XE 16.6.1 |
05-23-2017 10:49 PM
Thannks Mark,
so I need to order only below parts, I mentioned tengig single mode sfp as the device support both 1g and 10g .
qty part
1 WS-C3850-24XS-E
24 GLC-LH-SMD
please let me know if its ok...
05-22-2017 08:03 AM
Hi
If you are looking for 24 SFP ports, you can buy:
WS-C3850-24S-E
WS-C3850-12S-E
WS-C3850-24S-S
WS-C3850-12S-S
All of these models has SFP ports only and you can include a module of 4 SFP more.
http://www.cisco.com/c/en/us/products/switches/catalyst-3850-series-switches/models-comparison.html
Hope it is useful
:-)
05-22-2017 08:06 AM
Below you will find a link with the SFP and modules supported by model
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/data_sheet_c78-720918.html
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide