cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
565
Views
5
Helpful
1
Replies

WS-C4510R-E boot flash command

ROSS FITHERIDGE
Level 1
Level 1

Hello ,i was putting new image on 4510 just wanted to check if below command in need to put on or is ther some other syntax

boot system flash bootflash:cat4500-ipbasek9-mz.122-53.SG9.bin   <--- is command which i have placed

SW001#sh bootflash:

-#- ED ----type---- --crc--- -seek-- nlen -length- ---------date/time--------- name

1   .D image        FC388696  BD0F08   33 12127880 Feb 11 2009 07:51:44 +00:00 cat4500-ipbase-mz.122-31.SGA8.bin

2   .. image        3CFF21B7 1A23254   32 15016652 Apr 21 2009 04:23:34 +00:00 cat4500-ipbase-mz.122-50.SG1.bin

3   .. image        0EBE4848 29A2654   34 16249728 Oct 8 2013 04:57:10 +00:00 cat4500-ipbasek9-mz.122-53.SG9.bin

17947052 bytes available (43394644 bytes used)

1 Reply 1

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Ross,

I think you should be good to go.

The file is uploaded on to bootflash and you are seeting the correct boot system.

YOu can go ahead with your plan.

REgards

Inayath