11-11-2021 12:28 AM
Hi all,
I want to confirm the PSU of the chassis WS-C6509-E is faulty or not.
So my question is, by look at the system alarm, its confirmed that the PSU is failed: -
environmental alarms: system minor alarm on power-supply 1 power-output-fail (raised 15:52:23 ago) NAME: "PS 1 WS-CAC-6000W", DESCR: "AC power supply, 6000 watt 1" NAME: "PS 1 WS-CAC-6000W", DESCR: "AC power supply, 6000 watt 1" PID: WS-CAC-6000W , VID: V05, SN: DCH1539Y010
but somehow the PID and SN number in show inventory is still shows up.
from my experience if the parts is faulty, the PID and SN shouldn't shows up. am I right?
I just want confirm this log system is valid or not.
Please advise.
Thanks,
Hafiz
11-11-2021 12:53 AM
Replace the PS first and then check again.
11-11-2021 01:42 AM
- You may want to have a look at the led-status indicators on the power supply. Usually a failure will be visibly indicated.
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide