Hi Leo and thank you for respons.
This is what i got from a sh license. Btw if you add AP license, does it save on the WiSM2 or on the SUP? Because i dont see any.
Router#sh license
Index 1 Feature: MACSec_Encryption
Index 2 Feature: CTS
Index 3 Feature: TEST_FEATURE_1
Period left: 4 weeks 2 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 4 Feature: TEST_FEATURE_2
Period left: 1 hour 0 minute
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Router#sh license udi
SlotID PID SN UDI
--------------------------------------------------------------------------------
*5 VS-SUP2T-10G VS-SUP2T-10G:
Router#sh license all
License Store: Primary License Storage
License Store: Evaluation License Storage
StoreIndex: 0 Feature: TEST_FEATURE_1 Version: 1.0
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 4 weeks 2 days
Evaluation period left: 4 weeks 2 days
License Count: Non-Counted
License Priority: None
StoreIndex: 1 Feature: TEST_FEATURE_2 Version: 1.0
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
Evaluation total period: 1 hour 0 minute
Evaluation period left: 1 hour 0 minute
License Count: Non-Counted
License Priority: None
Router#sh module 7
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
7 4 WiSM 2 WLAN Service Module WS-SVC-WISM2-K9
Mod MAC addresses Hw Fw Sw Status
--- ---------------------------------- ------ ------------ ------------ -------
7 1.1 12.2(18r)S1 15.2(1)SY7 Ok
Mod Online Diag Status
---- -------------------
7 Pass
