05-04-2012 03:42 PM - edited 03-07-2019 06:31 AM
This may be a trivial question but I want to make sure this will work before implementing. We have a 4503 with a SUP4 and we want to swap a line card (WS-X4306-GB) from that chassis to a 4507 with SUP2-Plus. My question is will this work without having to reload the switch/SUP? I'm thinking it will, but I wanted to ensure that this is indeed the case.
Also, has anyone done this kind of a swap before and ran into any issues?
Any help would be certainly appreciated.
Cheers,
Syd
05-04-2012 04:05 PM
Sytomas,
It should without incident. Had to do this a # of times.
Dan
Sent from Cisco Technical Support iPhone App
05-04-2012 04:16 PM
Thanks Dan!
05-04-2012 05:52 PM
Yes Syd. This will work and won't affect the supervisor card of either chassis.
05-05-2012 05:13 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
leolaohoo wrote:
Yes Syd. This will work and won't affect the supervisor card of either chassis.
Probably safer to think of this as "shouldn't" vs. "won't".
I.e., if possible do this during a maintenance window.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide