Request Visio Stencil for Catalyst 8300/8500

[WilliamWhitfield41805]

Greetings,

Requesting stencils for Catalyst 8300 and 8500, or at least the location in case I missed it.

Thanks

[balaji.bandi · Accepted solution]

this is latest what cisco has : (until anything shared privately not aware of)

https://www.cisco.com/c/en/us/products/visio-stencil-listing.html

[aluby7]

Can we get Cisco Catalyst 8200 Stencils? I'm not sure why there would be 8300 and 8500 but not 8200.

[Tobias Heisele]

Is there any visio stencil that contains C-NIMs and C-SMs?

[staswright]

The 8200 is in the existing stencil, but I'm guessing it's not correct.  8300 is missing.

[LenderS]

Esteemed, bumping this thread as we are in dire need of a stencil for the sixteen-port NIM module for the 8000 series routers.

Part number: C-SM-16P4M2X

[LewJack1980_]

Bumping as I also need the cisco 8300 series stencils which are currently missing as well as the C-SM-16P4M2X service module that can be installed into it

[tcanthonyii]

Same as LewJack1980_.  I need the 8300 stencils as well.  why after so long has this not been provided?

[hemmerling]

I see that there are Edge 8300/8500 stencils, and if they weren't in a format from 20 years ago (.vss) I might be able to open them and use them (blocked by security policy because the 20+ year format is less secure).
Can Cisco maybe release them in the newer .vssx or maybe both.

[lburleso]

I ran into the same problem and used this free converter: https://products.groupdocs.app/conversion/vss-to-vssx

Seriously, it worked. 🤷‍