Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm looking for where in the documentation that it explains that SNMP logins will never work when the device is in quiet mode.We run:login block-for 900 attempts 3 within 120and of course:login quiet-mode access-class SPECIAL_PEOPLE_ACLAnd even if th...
For anyone else having this kind of problem, I would ask if you have type 6 or type 7 passwords for your radius servers in the 9800CL config?For years I've been seeing a bug in IOS-XE that you only see when you turn on FIPS and have type 6 radius pas...
Can someone explain what could possibly be causing the problem we've been seeing recently.We have had to implement ip dhcp snooping and it's having a bizarre interaction with spanning tree when certain 3650 devices reboot.Maybe it's because we're wri...
It would appear that when using ISE 3.2 in HA with two ISE servers that if you are using the second server as a Device Admin as well that you will not be able to see those TACACS live logs.They don't seem to forward TACACS live logs from the secondar...
I'm trying to update an outbound ACL on a VLAN interface on a 6807 and I'm needing to remove the ACL from the interface, remove the ACL completely, create a new named iteration (let's say OUT_ACL_12), the new ACL contains similar lines from the older...
permit any anyor the host IP or even the subnet, it doesn't matter and we have tried all of them.I can't trigger the SNMP failure, but basically it's Forescout, when in quiet mode (and FS's IP is in the quiet-mode ACL), snmp just fails for various fu...
I had 7 Micro USB cables when we got a C1111-8P and two where actually data cables, the others were just charging.Not sure why Cisco stopped including the cool blue USB cables when you buy a router, it would solve all this confusion.
So this has always annoyed me in regards to Cisco privilege levels, the fact there are 2, everything at 15, and then whatever other number you pick and then you get to manually type out all the various commands for that number. But what this user fou...
So I think I figured out what I'm seeing. It looks like on a 3650 running 16.10 or higher (maybe earlier) that when you enable "ip dhcp snooping vlan xx" and "ip dhcp snooping", that the switch will sometimes put a random mac address from one of its ...
I see that there are Edge 8300/8500 stencils, and if they weren't in a format from 20 years ago (.vss) I might be able to open them and use them (blocked by security policy because the 20+ year format is less secure).Can Cisco maybe release them in t...
