AD Integartion for Video Core Components

[t.gupta]

Hi Experts

We have the following video Core components in our enviornment

1) VCS control and Expressway with Version 7.1

2) Codian MCU and Gateway installed in the MSE Chasis

These devices need to be attached to the AD forrest to get rid of local admin accounts created on VCS-Control/Expressway, ISDN GW and MCUs.

Please suggest what needs to be done to integrate these to make them working.

If there is any documnet plaese share.

Regards

Tarun

[Patrick Sparkman]

Tarun Gupta wrote:
1) VCS control and Expressway with Version 7.1

For the VCS Control/Expressway, you configure AD authentication from the VCS > Maintenance > Login Accounts.

More details can be found in the admin guide, starting on p287.

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/admin_guide/Cisco_VCS_Administrator_Guide_X7-2.pdf

I'd also recommend updating your VCS to X7.2.2, as you're still on X7.1.

Tarun Gupta wrote:
2) Codian MCU and Gateway installed in the MSE Chasis

For the MSE MCU and Gateway, there isn't an option to configure AD authentication, you are limited to using the locally created accounts.