Hi there,I have one router working as PBX with CME 8.6 and unity module, i want to use it for fax to email and vice versa, i read all the documents but thinks are bit confused, can anyone guide me in steps.
Has anyone came across an issue where they couldn't access the E20 root account with a password? I have several that have the root account set with passwords, but I can't login, it keeps throwing back "authentication failed". However, if I leave th...
Hello,I have an SX20, when i make an external video call is showing my internal IP Address instead of my Public IP Address.Somebody can help me?RegardsLeonardo Santana
Dears,i have a problem when trying to make an external calls ( internet calls ) i have the following setup and configurations :1- one vcs with dual interface network card one port is nated to a public ip address LAN1: 192.168.1.200LAN2: 192.168.2.230...
Hi,For TMS and IBM Lotus notes HTTPS/HTTP connectivity, is it a two way communication or one way only? The customer is asking since they need to define on the firewall.Thank you for your assistance.Best regards,Acevirgil
Good morning,In my company we are working in a new IP Telephony solution. This solution includes CUCM enterprise for 1.100 users, two MX200 endpoints and two 2911 gateways. The client wants to include multiconference sessions between Video telephones...
Had a VCS crash due to disk hardware failure.Have rebuilt the vm on a new UCS blade chassis (it was on an IBM center)But now it is coming up with a different serial number. This is causing the backup to not install the old keys.Is there a way to chan...
Hi AllWe have faced the below problem in our VCS X7.2 enironment. Since the search history on VCS Expressway display the iwf@VCS_IP_Address.Can anybody tell me why below search history entry created.our setup is VCSc & VCSe and two hundred endpoint.R...
if it is rare, but are asking me, I have no c20 in the office, if not tried, but the C20 mic gives voltage of 10-12 V, and if a mic is not a hadset (PC) supports this whether to create noise.It is rare, but if someone has done me a great favor ... th...
We have 4 Cisco C40 units. In doing a preventative maintenance check, I noticed that when I try to connect a 3-way multipoint call to any of the units, the 3rd point is only connecting audio only, and I'm trying to get them all to connect with vide...
Hi All, We have sx-20 codec along with the 4x 1080p camera in our campus.We are facing some problems with the camera. When it is rotaing left/ Right side, its creating some anonymous sound. We are bit confused about the root cause of that sound. ...
Hi all,please share how to make video in Content Server (CS) can be played in website page (not by CS web interface), when i use cisco MCu 4200 or 4500 there is embedded applet code which i can insert it in website page code. But inn CS there is only...
Hi,I have two SX20 and one ISDN Link.Knowing as ISDN Link manage calls for one endpoint, how can route call destined to Internet from endpoint connected to isdn link box ?Is their any possibility to separate between isdn calls and IP Calls ?Thanks an...
We have in the auditorium Kramer (or Crestron and Blackbox) AV Matrix and Cisco SX20. When I connect my MacBook (or iPad) to the digital connector (DislayPort/HDMI) on the SX-Series device does not display the computer's content. But when I show the ...
