ATA 188

[ccthompson]

I have a Cisco ATA 188 phone adapter. Problem i am having is that i cannot get to the HTTP configuration page(http://ipaddress/dev). I also cannot ping the device from my PC or switch.

I can however ping the ATA from the router console, which i find odd, because the ATA is connected to the switch, and the switch cannot ping it, yet the router can.

Anyway, i put an analog phone into port 1 and pressed the button to get to the config menu, i dont know the key command to get HTTP access. I can review the IP, Subnet, NTP settings, TFTP, ect...

Just cant seem to get to it. Can anyone help on this? Thanks in advance!

[anup.anand]

Sounds like the ATA might not have a default gateway.

To configure default gateway, choose option 2#. Separate dots with *.

Please reboot the ATA after you save the changes.

Regards,

Anup

[ccthompson]

I re-entered the default gateway, but i still cannot reach the ATA through pinging from the switch or any PC.

Only the router can ping it. Thanks!