12-09-2011 08:43 AM - edited 03-17-2019 10:40 PM
How Do I block a outside call within call manager?
12-11-2011 06:54 AM
If you are using h323 vice gateway you can use reject translation rules to bolck incoming calks based on calling number
If you u have cucm v8.5 and later you can do it on cucm using translation patterns
HTH
Sent from Cisco Technical Support iPhone App
12-22-2011 06:24 AM
Hello,
Here is the document from Cisco to block calls base on Calling Party ID. By the way, this is supported in CM V8.5 or later.
https://supportforums.cisco.com/docs/DOC-18367
Hope this helps
Mark
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide