06-05-2017 04:31 AM - edited 03-18-2019 01:10 PM
Hello, I`d like to know if the C20 Videoconferencing System has the option to enable Echo Cancellation on the line input.
Thank you.
06-05-2017 10:40 AM
Software version might be helpful.
Have you looked at the xconfig commands:
xConfiguration Audio EcReferenceDelay Mode
Set the acoustic echo cancellation reference delay mode.
Requires user role: ADMIN
Value space: <Off/Fixed>
Off: No extra latency will be added to reference signal used by the acoustic echo canceller.
Fixed: The extra latency given by Audio EcReferenceDelay Delay will be used to compensate for
latency in the acoustic path, typically introduced by TV monitors.
Example: xConfiguration Audio EcReferenceDelay Mode: Off
xConfiguration Audio EcReferenceDelay Delay
Adjust the time slot (in milliseconds) of the acoustic echo cancellation. Only applicable when Audio
EcReferenceDelay Mode is set to Fixed.
Requires user role: ADMIN
Value space: <0..250>
Range: Value from 0 to 250 milliseconds.
Example: xConfiguration Audio EcReferenceDelay Delay: 120
06-05-2017 05:44 PM
Echo cancellation only applies to microphone inputs, does not apply to line inputs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide