cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4463
Views
0
Helpful
15
Replies

C20 and Sonicwall

mpolishevsky
Level 1
Level 1

Hi All,

Have been breaking my head trying to figure this out, but here is the issue and hopefully someone might be able to help. We have a Tandberg C20 and Sonicwall 3200 for our firewall. On the Sonicwall, Persitant NAT, SIP Transformation and H323 are enabled. There is a NAT rule from the outside IP to the inside IP of the C20. There is a firewall rule from WAN to LAN to allow all the video conferencing protocols available to the C20. The C20 has Automatic NAT set and the IP address is the internal address.

Here is the question.... Whn I do an external call, it connects, but says No Incoming Video, this happens no matter where I call. On the Sonicwall, all the packets are showing as forwarded to the C20's IP address.

Any ideas?

Thanks.

15 Replies 15

Hello Max.

Thx for the feedback, endorsed/+5 your answer for that.

If you could give points to the postings we made and set the thread to answered.

That is what motivates us (at least me :-) here!

Please remember to rate helpful responses and identify helpful or correct answers.

Please remember to rate helpful responses and identify