Hi All UC Experts,
I want to deploy the Cluster over WAN on the Expressway 8.1.1 between the HQ site and the DR site. I am thinking can I deploy the peer Expressway to my DR site. I checked the doc: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Cluster-Creation-and-Maintenance-Deployment-Guide-X8-1-1.pdf
The doc showed some points about the Expressway Cluster Prerequisites as the three points:
A DNS SRV record is available for the cluster which contains A or AAAA records for each peer of the cluster.
Each peer has a different LAN configuration (a different IPv4 address and a different IPv6 address, where enabled).
Each peer in a cluster is within a 15ms hop (30ms round trip delay) of each and every other VCS in or to be added to the cluster.
Would you mind confirm some issues about the Expressway Cluster over WAN?
1. Can using on the different wan resilience protocols? e.g. BGP AS number? OSPF? IP SLA?
2. Is the Active-Active on the Expressway Cluster?
3. Will be auto synced the all configurations?