TelePresence and Video Infrastructure

Hi,We deployed VCS Control and VCS Expressway.The only protocol being implemented was purely SIP and only SIP ports were defined on the firewall.Internal SIP calls works fine as well as external using Jabber video registered on VCS Expressway calling...

Hi All Collaboration Experts,CM 9.1.2IM& Presence 9.1Jabber 9.7 | Jabber 9.2 (Windows)I built up a Linux Apache web server (10.0.0.1) for loading the contact photos on the Jabber.And I modified the jabber-config.xml as "<UDSPhotoUriWithToken>http://1...

Hi all,I have two questions about Conductor used with TMS.But first the Setup:- TMS 14.3.2- Two Conductor (clustered) XC2.3, integrated to VCS with call policy service; both conductor are in the TMS- TPS  Sv: 4.0(1.57) remotly managed via Conductor, ...

Hi All, Is there any way I can use any subzone that I created in Target while defining search rule ? The only option I get is "Local Zone" or other zones created. I was informed that this feature is there in new VCS versions may 7.2 n above. I am run...

hey guysI have a problem with multicast, here is the senario.I have a video Server that sends streams in multicast to its clients. the clients in same subnet with server don't have any problem and receives streams clear but the clients that are not i...

Hello! At this moment in my company I have separated videoconference network on Polycom equipments/software (DMA 7000, RMX 4000) andseparated IP Telephony network on Cisco equipments/software (Cisco UCM 9.1.2).I want to integrate this two separeted n...

I need to migrate a TMS running 12.6 on a VM with Win2003 (SQL2005) to a new VM running Win2008 or Win2012.Initially I was thinking about upgrading the old server to the latest TMS v13.1 supported on Win2003 and then backup the db.But I've doubts if ...

We are successfully using MRA with Jabber and many EX90 endpoints.  We are using CUCM 10, a separate VCS-C/E (8.2) for MRA and all is working well but we have run into a bug.  My users that have EX90s connecting to UCM via MRA can do calls just fine ...

Can the Multisite license be "transferred' to another EP or is it tied (via S/N or MAC?) to the EP for which it was purchased? 

Hi All,I have a problem with a Cisco VCS control in my network. firstly i remark that the endpoint are not registered to thee VCS, i try to access to the VCS  by web but i cannot ( i cannot ping it also). I choose to connect to the VCS by Console but...

HiWe have Cisco CUCM 9.1.1 and video device as well as 9971 phones are registered with CUCM.We have VCS and VCSEVCS is integrated with CUCM via SIPWe can receive and make SIP video calls through internet. It is working fine.But some of the video call...