03-06-2013 09:39 PM - edited 03-18-2019 12:44 AM
I tried to follow the quick start guide to do the initial configuration but I am not able to set the IP address. i got below screen but I can type nothing there:
Cisco TelePresence Content Server 5.3.3316
IP Settings>
Address Type
*IP Address
Subnet Mask
Default Gateway
DNS (Preferred)
DNS (Alternate)
[UP] Prev Item, [DOWN] Next Item, [ENTER] Select, [ESC] Back
------------------------------------------------------------
Cisco TelePresence Content Server 5.3.3316
IP Address>
*0.0.0.0
[UP] Prev Item, [DOWN] Next Item, [ENTER] Select, [ESC] Back
-------
anyone has this experience before?
thank you.
03-06-2013 10:05 PM
Hi melany
Are you trying to set the address through a console cable? It would be easier to connect a keyboard and a monitor and set the ip by logging in to the windows server os.
/Magnus
Sent from Cisco Technical Support iPhone App
03-06-2013 10:28 PM
sorry i found out that it can only be edited when it got a lan connection
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide