02-06-2018 04:55 AM - edited 03-18-2019 01:50 PM
Hi everybody!
Need help in configuring outbound calls in cisco Meeting server.
Uptime | 56 minutes, 54 seconds |
Build version | 2.2.4 |
XMPP connection | connected to localhost for 56 minutes, 52 seconds |
Authentication service | registered for 56 minutes, 52 seconds |
Lync Edge registrations | not configured |
Conference work fine.
Can dial to IVR number and enter conference space.
Links with invitation also work.
But the only issue - i cannot call to outbound direction. Screen from outbound config in web in attach.
In sip debug i see this kind of info:
call 42: outgoing SIP call to "@172.16.51.167"
call 42: setting up UDT RTP session for DTLS (combined media and control)
call 42: ending; remote SIP teardown with reason 18 (not found) - not connected after 0:00
I tried dial in any ways - like 3999@172.16.51.167 and 3999@sharifa.local and 3999 and 3999@cucm.sharifa.local.
Please help!!!
02-28-2018 09:40 AM
Hi,
Did you ever get it working, I have the same issue
02-28-2018 10:42 AM
No!
Do you have the same version of CMS?
What kind of license you have? Trial?
02-28-2018 09:06 PM
02-28-2018 10:14 PM
Call from WebRTC not successfull.If i understand correcty WebRTC is space in cms or space by using meeting app.
How to make calls from cms itself?
02-28-2018 10:51 PM
02-28-2018 11:25 PM
Ok! Thanks i will try to upgrade it to the latest version and then will provide a result.
03-02-2018 08:59 AM - edited 03-02-2018 09:00 AM
Hi
I have the same issue... sometime the message is
call 599: outgoing SIP call to "647xxxxxxx@192.10.10.10" from space "test Space"
and call doesn't connect and sometime is
call 599: outgoing SIP call to "sip:647xxxxxxx@192.10.10.10" from space "test Space"
and call get connected.
Did you find a solution?
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide