CMS publish to Internet

[fandhikap]

Hi All, 

i'm trying to publish CMS to internet. what i need to configuring?

  -CMS Server with single-combined deployment. 

  -Self-signed Certificate

  -1 interface

  -callbridge, webbridge, xmpp working fine from internal.

when i try to NAT CMS, only webadmin that can be accessed from internet. but when i'm trying to create a call using web, it fails. web not showing anything from CMS.

really appreciates for help me.

Thanks

[Jaime Valencia]

You need TURN in order to get media from outside users, if you haven't, I suggest you review the collab250 training on SalesConnect.

[fandhikap]

Hi Jaime,

can you provide me example configuration about TURN server?
i'm already configure TURN server, but no luck. can't create call from web

acano> ipv4 a
IPv4 configuration:
address 10.30.30.173
default true
dhcp false
enabled true
gateway 10.30.30.1
macaddress
prefixlen 24
IPv4 observed values
Addresses:
10.30.30.173/24
Routes:
source destination gateway global
0.0.0.0 10.30.30.173 0.0.0.0 false
0.0.0.0 10.30.30.0 0.0.0.0 false
0.0.0.0 10.30.30.0 0.0.0.0 false
0.0.0.0 10.30.30.255 0.0.0.0 false
0.0.0.0 0.0.0.0 10.30.30.1 true
acano>
acano> turn
Enabled : true
Username : xx
Password : xx
Realm : xx.com
Public IP : 1.1.1.1
Listen interface a
acano>

Thanks.

[ali.yusuf]

 Hi 

It really depends what you are after, you will need load balancer for native meeting app signalling, WebBridge for meeting app signalling and TURN for native/meeting app media, 

You will need external certificates ideally public for all components the web bridge, TURN and load balancer

webadmin should not be accessible from the internet, web bridge however can be, please see appendix A & B in the following document https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingServer/Deployment_Guide/Version-2-3/Cisco-Meeting-Server-2-3-Single-Combined-Server-Deployment.pdf which tells you the DNS records and ports used 

Hope that helps 

Yus

Pls rate if this helps.