Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have recently had a case where two SIP trunks we are running with CME has been compromised Simultaneously and we've racked up £££ worth of fraudulent calls.The SIP trunks are provided by Gamma Telecom's IPDC service. Gamma are saying that the C...
Call setup:FXO -> AA now... when a call comes in through the FXO port to the AA and the caller hangs up before making a option etc the call remains in the system. and that FXO port is engaged.any suggestions?
hi gallenvthe GN2000 is not compatible with a 7911 as it has a USB. The JABRA GN2100 however 'is' supported but required a Electronics Hook Switch (EHS) see the following for more information https://www.jabra.co.uk/business/contact-center-headsets/...
Hi Sterling have you had a look at the Collaboration Flex Plan? its a single subscription that gives you access to the collaboration services and software. with it you can mix and match buying and deployment models during the subscription, depending ...
Hi Aniket the common name (CN) is the DNS host name of the CUCM, other addresses go in the SAN (Subject Alternate Names), this guide will better explain what you need from a CUCM perspective >> https://www.cisco.com/c/en/us/support/docs/voice-unified...
HI Aniket - unfortunately ive not seen this Video, but Generally speaking, certificates are created for the hostname/FQDN of the server in this case the CUCM, as a result if you browse to the IP address it does not recognise it and will show you an e...
Hi, in CUCM have you configured the locations and regions - you can try by increasing Video bandwidth etc.
Hope that helps
Yus
Please rate if this helps.
