10-17-2016 07:53 AM - edited 03-18-2019 06:29 AM
Hi
I have the following products in my deployment :
For adhoc conference there is no Content Sharing button in Jabber or in Cisco DX Endpoint , is it supported feature in such a deployment or Am i facing another issue ?.
Many Thanks
Ahmed
10-17-2016 11:06 AM
It's supported, make sure you have "Allow Presentation Sharing Using BFCP" enabled on the Conductor SIP Trunk as well as in the SIP Profile in use by the devices. Also, make sure that content is enabled on the conference template within Conductor.
10-17-2016 01:58 PM
Hi Patrick ,
Yes i have enabled the BFCP on the CUCM-Conductor SIP trunk , on Endpoint SIP Profile , & also enabled the Content on the Conference Template . Still i can't get the Share Content Button on both Jabber & DX .
11-03-2016 11:00 AM
Have you confirmed that Conductor is deployed per the Conductor with Cisco Unified CM Deployment Guide (XC4.1)?
What happens if you try a point-to-point call with the DX endpoint and another TelePresence endpoint?
What happens if you try a call with two TelePresence endpoints connected to Conductor?
10-26-2016 04:50 AM
What i reached that there is no selective "Content sharing" in Jabber for Windows but whole "Screen Sharing "
11-03-2016 10:56 AM
Yes, Jabber is only capable of screen sharing, not sharing of specific applications. See Planning Guide for Cisco Jabber 11.7.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide