DX80 Contact list

[SYED AHMED ALI]

Hi,

we have only one requirement in DX80 ,we want all contacts to be displayed in the Contact List, it should come automatically when ever any user is connected to DX80. Can anyone please advice..

Also it would be great if anyone can tell me the difference between DX80 android version VS. Cisco version.

[geturner1]

We had 60+ android systems globally and the lack of remote access for troubleshooting was a nightmare. the upgrade to CE8 was long waited for and now all the endpoints (150+) are on the same firmware code set making management much easier. 

Defined "displayed" for the contact list. the search works similar to an email client, you just start type the name of who you are looking for and displays the result. if you are registered to the UCM, first and last name are the searchable field. this is a fast and clear method requiring no user training.

hope it helps

Eric Turner

geturner@akamai.com

[SYED AHMED ALI]

Hi Eric,

Appreciate your reply, Let me put it in this way.

When a user opens a contact list HE/SHE should view all the end user details registered in CUCM.

[Manish Gogna]

Hi Syed,

Please check the following admin guide for DX80 that provides details of how contacts can be added/imported on DX80

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/dx/series/admin/1022/DX00_BK_C9FCBAE4_00_cisco-dx-series-ag1022/DX00_BK_C9FCBAE4_00_cisco-dx-series-ag1022_chapter_01110.html#DX00_RF_C2AAAD0A_00

Manish

- Do rate helpful posts -