08-27-2014 11:20 PM - edited 03-18-2019 03:20 AM
Hi,
We have VCS cluster in our environment (Primary and secondary VCS-Control and VCS-Express). I could see almost equal number of endpoints registered on each VCS-Control. How does the Endpoint know to which VCS-Control server it has to register to ? How does this load balancing is acheived . any setting that i have to look for ?
Thanks!
Solved! Go to Solution.
08-28-2014 08:55 AM
This would depend on how you have your DNS setup. Can you tell us in detail how you have your endpoints registering to the clusters, as well as how you have your DNS configured? Are you using SRV records, round-robin?
The VCS Cluster Deployment Guide, appendix 5 goes over how to setup your endpoints to register to the cluster and the different methods of doing so. Appendix 6 covers SRV records.
08-28-2014 08:55 AM
This would depend on how you have your DNS setup. Can you tell us in detail how you have your endpoints registering to the clusters, as well as how you have your DNS configured? Are you using SRV records, round-robin?
The VCS Cluster Deployment Guide, appendix 5 goes over how to setup your endpoints to register to the cluster and the different methods of doing so. Appendix 6 covers SRV records.
09-12-2014 04:01 AM
Thanks for the correct answer and pointing to the correct doc. It was very useful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide