Feature request for TMS Conference Alias

[ckelson]

With the Codian MCU on the TMS added as the default MCU the alias' that get used are confgigued to increment in steps of 1 up to 1000 . Problem is that the TMS will always use the first available alias instead of cycling all the way through the 1000 alias' alloted.

[Paul Woelfel]

As far as I know this behaviour has been changed from TMS 13.2 to 14.1. Now the numeric Id increments with every conference.

[Kjetil Ree]

Hi,

@Paul: This behavior should not have changed between TMS 13 and 14 as far as I can see. If you see changed behavior, please let me know the specifics!

@ckelson: You'll have to raise feature requests through more formal channels; the Cisco Support Community is not the approrpriate forum.

Regards,

Kjetil

[Paul Woelfel]

Ok, I did not yet upgrade the TMS Systems I manage, I just got this info from our cisco systems engineer. The Upgrade to TMS 14.1.1 is still on my roadmap...