07-25-2012 08:24 PM - edited 03-17-2019 11:31 PM
I have a question what is the feedback option key on Edge95.Anybody know it please help me
thankyou
07-26-2012 12:52 AM
Hi Nattapong
There is no feedback option key on the Edge. These are the various types of keys for MXP :
Could you please let us know where did you find this name "Feedback Option Key".
Regards,
Mubashshir Akhtar
07-26-2012 12:40 PM
Nattapong,
The 'Feedback' key is only required for the proper functionality of the 'Synch' product. It allows the codec to output information not normally available outside of integrator codecs.
Thanks,
Justin
07-27-2012 02:02 PM
Never heard about it +5 :-)
Please remember to rate helpful responses and identify
07-29-2012 04:42 PM
In general, Edge MXP is not design for integration therefore “xfeedback” is not available on API like T3000MXP/T6000MXP support.
For specific special integration, by adding feedback option key (xConfiguration OptionKey Special: < 0="">), Edge MXP coded to support additional feedback feature to integrate with external device, like solution Sync/Whiteboard.>
07-29-2012 06:34 PM
Dear all
Thank you so much I know all option like you but I bought cisco telepresence synch intregate with smart board from tac told me " You have feed back option key already" that make me confuse because I know Edge 95 is full option not another option anyway thank you for help
07-29-2012 06:45 PM
Just clarify the option key for Edge MXP.
MXP only take “one” 16 digits key for each option configuration (feature, bandwidth, and special).
Feature (xConfiguration OptionKey Features): either “no option”, “NPP only” or “NPP + Multisite”.
Bandwidth (xConfiguration OptionKey Bandwidth): either “IP only”, “IP + ISDN” or higher bandwidth range of “IP + ISDN”.
Special feature (xConfiguration OptionKey Special): feedback for integration product
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide