06-23-2012 09:22 PM - edited 03-17-2019 11:21 PM
The design is like a Private phone line between two site over VOIP network. Im using CCME 7 on both routers.
Private Phone connects to fxs on router and thesame setup on the other site. attached the design diagram and config.
06-24-2012 08:29 AM
Try to use "connection plar opx" under voice-port on both side. In this way, when the phone become off hook calls automatically the remote extension.
Regards.
06-24-2012 08:54 AM
hi Daniele,
is this correct Dan,
voice-port 0/3/0
connection plar opx 1111
caller-id enable
it gives an error code 21.
06-25-2012 05:46 AM
Do you have configured connection plar opx in both sites? Do you have removed connection trunk?
Can you add the output of "debug voice ccapi inout"?
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide