08-23-2010 04:35 AM - edited 03-17-2019 10:05 PM
I have got a 2911 with the c2900-universalk9-mz.SPA.150-1.M2.bin IOS on it, The software advisor tells me it has Gatekeeper functionality, and if you do a Show Licence you can see an Eval licence in it.
But there are not Gatekeeper commands in the router?
I am aware that you need to add a licence to the Router to give it the functionality permanently, but have always configured it on the Eval licence whilst waiting for the real one to come through.
Anyone have any ideas how I now activate the GK functions on this router while I am waiting for the full licence? Or even if the full licence will bring the commands back?
T
08-23-2010 05:38 AM
Have you actually activated the evaluation license ?
08-23-2010 05:44 AM
If I do a show licence I get the following
Index 5 Feature: gatekeeper
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
08-23-2010 07:15 AM
From
http://www.cisco.com/en/US/docs/routers/access/sw_activation/SA_on_ISR.html#wp1146337
follow examples.
you can also send feedback to cisco as the gatekeeper example is missing, linking instead to a not explicative document.
Please remember to rate useful posts clicking on the stars below.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide