Gateway priority configuration on IOS Gatekeeper

[george]

Hi,

I am trying to route international calls to specific gateways that are registered on my gatekeeper with prefix 00*. I issue the command

zone prefix "local_zone" 00* gw-priority 10 "H323_alias1" "H323_alias2" and verify that the two gateways are registered with the highest priority but calls are routed alsso to the gateways with prefix 00* and priority 5.

I am running 12.3(8)T1 IOS on a C3640.

Any ideas?

[amritpatek]

You may like to verify your configuration with some of the config examples given in the following document

Understanding Cisco IOS Gatekeeper Call Routing

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a00800a8928.shtml