12-12-2014 12:12 PM - edited 03-18-2019 03:47 AM
Hi all,
Do you have any guides, information and suggestions about integrating CUCM with MCU, TCS and TMS?
To centralized IPT and Video Conference enviroment, i need to register MCU and TCS to CUCM v10.5.
Also TMS should provision devices which are register to CUCM.
Best Regards,
Mesut
12-15-2014 01:16 AM
Hi Mesut,
Check this:
http://www.cisco.com/c/en/us/support/conferencing/telepresence-conductor/products-installation-and-configuration-guides-list.html
Regards,
Lilia
12-17-2014 05:25 AM
Hi Lilia
What do you say about CUCM+TCS ?
br Oleksandr
06-16-2015 06:58 AM
Hello! You can consult some of these posts on how to integrate TCS with CUCM:
https://profcollab.wordpress.com/2015/06/11/video-broadcasting-and-recording-with-cisco-part-1-update-cucmtcs-6-2/
https://profcollab.wordpress.com/2015/06/04/video-broadcasting-and-recording-with-cisco-part-1-cucmtcs/
12-16-2014 06:42 PM
Hi Mesut,
You can refer below support forum links:
https://supportforums.cisco.com/discussion/11281276/cucm-cts-and-tms-integration
https://supportforums.cisco.com/discussion/11587226/registering-mcu-cucm-86
Regards
Sumeet
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide