11-14-2013 09:53 AM - edited 03-18-2019 02:08 AM
Hello,
I was wondering if Cisco's TelePresence VX Clinical Assistant is running the same OS as the SX and Codec C series? In other words, am I to expect the same commands to work over SSH?
Thank you,
James.
Solved! Go to Solution.
11-14-2013 03:45 PM
Yes, the VC Clinical Assistant runs a SX20 codec inside it, so the same SSH commands will work.
If you hold the main camera button for 5 seconds when the system is idle (not in a call), you will see a Status Message screen - on this, you will see a line similar to:
Codec: SX20 Ver: TC6.0.0 xxxxxx
See the Cisco TelePresence VX Clinical Assistant Firmware Release Notes for further details.
Wayne
--
Please remember to rate responses and to mark your question as answered as appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
11-14-2013 03:45 PM
Yes, the VC Clinical Assistant runs a SX20 codec inside it, so the same SSH commands will work.
If you hold the main camera button for 5 seconds when the system is idle (not in a call), you will see a Status Message screen - on this, you will see a line similar to:
Codec: SX20 Ver: TC6.0.0 xxxxxx
See the Cisco TelePresence VX Clinical Assistant Firmware Release Notes for further details.
Wayne
--
Please remember to rate responses and to mark your question as answered as appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide