ISDN Link questions

[p.marovino]

Hi there,

I have a couple of questions about the ISDN Link:

• is it possible to pair the SX10 with the ISDN Link?
• Is it possible to use the ISDN Link for more than one device? i.e. paring the devices via LAN instead of using a dedicated connection.

The scenario should be: two rooms, one equipped with a SX20 and one with an SX10; both should go in ISDN via the ISDN Link, obviously not at the same time.

Thanks in advance for your reply

Paolo

[Marius Nedregaard · Accepted solution]

Hi,

1) Isdn link cannot be paired with SX10 

https://www.google.com/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=sx10%20isdn%20link

2) You can use the ISDN link with as many supported devices as you`d like, but only one at the time.  You cannot have a C60 and EX90 at the same time

You can pair it over LAN.

If you want more than one device you would need a ISDN Gateway

//Marius

[p.marovino]

Hi Marius,

thanks a lot for your reply.

Regards

Paolo