License inquiry in the MSE8000

[Arbenjamin]

Dear all,

Based on Port matrix table of the  Administrator Guide

Mode          Licenses per port     Video ports

SD                          1                          80

HD                          2                          20

HD+                       4                           20

Full HD                   4                          15

Since our client would like to depoly "Full HD" in their network, anyone can confirm the maximum participant ( we guess is 15).

We did not need to buy full license on this case, the number of license(L-8420-2PL) should be 30  for this case?

Best Regards,

Ben Lai

[Martin Koch · Accepted solution]

Yes, the numbers look ok, at least for a single 8510 blade.

The backdraw is that even if you would dial in with a low resolution device

it will still take one full hd port.

I would recomend you to look into the conductor and the telepresence server.

(Contact your Cisco Partner or Representative regards converting a 8510 to

a telepresence blade and condidtions for the Conductor).

That combination would give you a dynamic port allocation method, so depending

on the scenario you could get more users on it.

(from the TPS release notes:)

Please remember to rate helpful responses and identify helpful or correct answers.

[Arbenjamin]

Dear Martin,

Thanks for your advise.

It is right there is a backdraw for such deployment.

We have a quick review on the dynamic port allocation, it seem much more efficient in MCU resource arrangement.

Best Regards,

Ben