08-19-2007 09:17 AM - edited 03-17-2019 09:07 PM
dear sir
I am using Pont to point microsoft base VPN and using CCME on both side , i wanna know how much bandwidth will be used for 1 voice call from side A to side B with VPN ? and can i register Ip Phone From side A to Side B using CCME ?
I m currenly using 64 K link.
Your assistance will be hihgly appreciatable.
Solved! Go to Solution.
08-19-2007 11:24 AM
A regular g.711 call takes almost 90 Kbps plus the VPN overhead.
Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.
If the VPN is passing all the traffic OK, you can register phones across the link without problems.
Hope this helps, please rate post if it does!
08-19-2007 11:24 AM
A regular g.711 call takes almost 90 Kbps plus the VPN overhead.
Your call should work OK on 64 K links if you configure codec g711ulaw under ephone.
If the VPN is passing all the traffic OK, you can register phones across the link without problems.
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide